https://youtu.be/zLFB6ulC0Fg

5 are WD HC530 datacenter drives and two are the 14TB EZAZ from Easystores. I don’t think any of the larger WD drives are SMR but I don’t have a definitive answer.

I haven’t installed any drivers on the Proxmox machine. That one has the 2.5Gb NIC built into the motherboard so I probably misspoke when I called it a “card” in the OP if that makes a difference. I’ll try this when I get home but I have run ‘lspci’ and it shows the NIC on both the host and container (Intel Killer 3100 2.5Gb though it’s listen as Killer 3000 2.5Gb) plus my iperf3 tests were showing ~2.3Gb speeds between both machines and the container.

As far as the 100GBe switch, I only need to transfer the media off the old machine once so I was just trying to go with something inexpensive since the standard 1Gb ethernet should be fine for most things after this initial transfer.

If you’re using QBittorrent, you can throttle upload/download speeds in the settings. I believe it wants speeds set in kibibytes (KiB) so you’ll need to convert your megabit internet speeds to your desired kibibyte limit (say maybe 50% or less of your available bandwidth).