AlexanderTheGreat@lemmy.world to 3DPrinting@lemmy.worldEnglish · edit-26 hours ago[Resin Printing Help] My Prints Have Started Coming Out With Weird Linesmessage-squaremessage-square5fedilinkarrow-up14arrow-down10file-text
arrow-up14arrow-down1message-square[Resin Printing Help] My Prints Have Started Coming Out With Weird LinesAlexanderTheGreat@lemmy.world to 3DPrinting@lemmy.worldEnglish · edit-26 hours agomessage-square5fedilinkfile-text
They’ve been coming out fine for about 700 hours (of print time, not light on time) now on my Photon Mono M5s Pro. Now it looks like someone craved a chunk out of it with a knife or something. Here & here. Edit: Looks like a dead pixel
minus-squareAppearanceBoring9229@sh.itjust.workslinkfedilinkEnglisharrow-up1·8 hours agoFrom the picture it seems that you need to change your fep sheet. When you look at the fep does the lines coincide with the marks it has?
minus-squareAlexanderTheGreat@lemmy.worldOPlinkfedilinkEnglisharrow-up1·6 hours agoMy troubleshooting steps so far have been: • Make sure temp is 26° • Mix resin • Make sure settings arecorrect • Fep Was changed • Plate was leveled.
minus-squareAppearanceBoring9229@sh.itjust.workslinkfedilinkEnglisharrow-up1·3 hours agoAre the lines on the side of the print or on the top? Do they appear always on the same spots? Try printing small callibration pieces, to see if it always happens https://www.thingiverse.com/thing:4707289 https://www.tableflipfoundry.com/3d-printing/the-cones-of-calibration-v3/ https://ameralabs.com/blog/town-calibration-part/
minus-squareAlexanderTheGreat@lemmy.worldOPlinkfedilinkEnglisharrow-up1·3 hours agoI did. Im pretty sure it was a dead pixel causing it. I’ve replaced the screen and I’m testing now.
minus-squareAlexanderTheGreat@lemmy.worldOPlinkfedilinkEnglisharrow-up1·6 hours agoTried changing it out. Still happening.
From the picture it seems that you need to change your fep sheet. When you look at the fep does the lines coincide with the marks it has?
My troubleshooting steps so far have been:
• Make sure temp is 26°
• Mix resin
• Make sure settings arecorrect
• Fep Was changed
• Plate was leveled.
Are the lines on the side of the print or on the top? Do they appear always on the same spots?
Try printing small callibration pieces, to see if it always happens
https://www.thingiverse.com/thing:4707289 https://www.tableflipfoundry.com/3d-printing/the-cones-of-calibration-v3/
https://ameralabs.com/blog/town-calibration-part/
I did. Im pretty sure it was a dead pixel causing it. I’ve replaced the screen and I’m testing now.
Tried changing it out. Still happening.